BYD Shark 6 Towing, Payload and Tub Loading Guide

Table of Contents

On the Australian BYD Shark 6 Premium, braked towing is 2,500 kg and unbraked towing is 750 kg. Payload is about 790 kg (GVM 3,500 kg minus kerb 2,710 kg). The Performance variant raises braked towing to 3,500 kg. Tub (tray) capacity is 1,200 litres. Those figures come from BYD Australia; always check the door-jamb plate and handbook for your own truck.

The BYD Shark is a plug-in hybrid dual-cab pickup (a “ute” in Australia). Depending on the market it is badged BYD Shark or Shark 6. This guide is a loading guide: how towing, payload and tub size work together, and how accessories eat into the weight you can still carry.

It is not a vehicle review. Specs can differ by market and model year, so treat the numbers below as a starting point and confirm them for your VIN.

Illustration: how BYD Shark 6 payload is used by people, accessories, cargo and towball download
Payload is a shared budget. People, accessories, cargo and towball download all count against it.

BYD Shark 6 towing capacity by variant

BYD Australia lists braked and unbraked towing on the Shark 6 range as follows (check the current spec sheet if your truck is newer):

Variant (AU)Braked towingUnbraked towingNotes
Dynamic Cab Chassis (1.5L hybrid)2,500 kg750 kgSame 1.5L hybrid family as Premium
Premium Pickup (1.5L hybrid)2,500 kg750 kgFigures on the BYD Australia Premium spec sheet
Performance Pickup (2.0L hybrid)3,500 kg750 kgHigher braked limit on the official Shark 6 page

Braked means the trailer has its own brakes. Unbraked is for light trailers without them. Local rules on towbar rating, trailer brakes and licences still apply, so ask a licensed fitter or your transport authority before you tow near the limit.

Towball download (the downward force on the towball) also counts against payload. A heavy caravan ball weight can use a large share of the payload before you put anything in the tub.

Payload: the number that runs out first

Payload is how much weight you can add to the empty truck before you hit Gross Vehicle Mass (GVM). On the BYD Australia Premium sheet:

  • GVM: 3,500 kg
  • Kerb weight: 2,710 kg
  • Approximate payload: 3,500 − 2,710 = about 790 kg

That 790 kg has to cover driver, passengers, fuel, accessories bolted to the truck, cargo in the tub and towball download. Performance and cab-chassis variants have different kerb weights, so their payload is different — read the plate on your door jamb rather than assuming the Premium number.

A simple way to stay legal:

  1. Start from the payload on your plate.
  2. Subtract people and a realistic fuel load.
  3. Subtract the weight of every accessory you have fitted (or plan to fit).
  4. What is left is for cargo plus towball download.

How accessories reduce payload

Every bull bar, canopy, tonneau, sports bar, drawer and bed liner has a mass. Once it is on the truck, that mass is no longer available for cargo. Heavy steel front protection and a full canopy are the biggest hits; a moulded bed liner is usually much lighter.

Before you build a full setup, add up the published weights (or ask the seller) and keep a margin. For canopies, covers, bars and tub protection, see the BYD Shark 6 accessories guide.

Parts that help day-to-day loading without claiming a weight figure on this page:

Marvix roll-up tonneau cover parts laid out before fitting to a BYD Shark load bed
Marvix roll-up tonneau cover parts for the BYD Shark load bed.
Marvix moulded bed liner and tailgate piece for the BYD Shark 5 and Shark 6 tub
Marvix bed liner for the BYD Shark 5 / Shark 6 tub.
Marvix sliding cargo drawer pulled out from a BYD Shark pickup tub
Marvix sliding cargo drawer in a BYD Shark tub, pulled out for access.

Tub size and what 1,200 litres means in practice

BYD Australia lists tray capacity at 1,200 litres for the Premium pickup. That is the volume of the open load bed, not a weight rating. A tall load that sticks above the sides still counts against payload even if the litre figure looks generous.

For fitting covers, liners and drawers, measure your own tub: length between the bulkhead and the closed tailgate, width between the rails, width between the wheel arches, and depth to the floor. Factory spray-in liners and aftermarket liners change the effective width at the lip, which matters for clamp-on covers.

Practical loading habits that protect both the truck and the rating:

  • Keep heavy items low and centred over the axle line where you can.
  • Use the tie-down points; loose loads shift and spike local stress on the tub floor.
  • If you tow and carry at the same time, re-check GVM and Gross Combination Mass (GCM) — the trailer limit and the truck limit are separate caps.
  • Roof or sports-bar loads have their own dynamic limit in the handbook; that weight also comes out of payload.
Marvix TPE floor mats fitted in the cabin of a BYD Shark 6
Marvix TPE floor mats in a BYD Shark 6 cabin. Mud and sand wipe off more easily than carpet.

Towing and payload together: a worked example

Suppose you drive a Premium with about 790 kg of payload. Two adults and a full tank might use roughly 200 kg (exact numbers depend on people and fuel). A steel bull bar, canopy and drawer might use another 150–250 kg depending on the parts. That can leave only a few hundred kilograms for cargo and towball download — even though the braked towing limit is still 2,500 kg on paper.

In other words: you can hit the payload (GVM) wall long before you hit the towing limit. Plan the accessory stack and the trailer ball weight together, not as separate decisions.

What to check before you buy tub accessories

  • Variant and bed length — Shark / Shark 6 listings are not always the same; match the product photos to your tub.
  • Drive side — some cabin mats are LHD or RHD only.
  • Clearance with other parts — a sports bar, canopy and tonneau often share the same rail space.
  • Weight — ask for the packed or fitted weight if it is not on the page.
  • Sensors and wiring — tub lights, cargo sockets and camera views must stay clear after fitting.

Large covers and canopies ship as bulky freight. Our guide to how body kits and large parts are shipped internationally explains why volume often drives the quote more than weight.

FAQ

What is the BYD Shark 6 towing capacity?

On BYD Australia figures, Premium and Dynamic (1.5L hybrid) are rated at 2,500 kg braked and 750 kg unbraked. The Performance (2.0L hybrid) is listed at 3,500 kg braked and 750 kg unbraked. Confirm the plate and handbook for your truck.

What is the BYD Shark 6 payload?

For the AU Premium sheet, GVM 3,500 kg minus kerb 2,710 kg gives about 790 kg. Other variants differ. Use the figure on your door-jamb plate.

How big is the BYD Shark tub?

BYD Australia lists tray capacity at 1,200 litres for the Premium pickup. Measure length, width between arches and depth on your own truck before ordering a liner, cover or drawer.

Does a canopy or bull bar reduce how much I can carry?

Yes. Their mass comes straight off payload. Add the weights before you buy, especially if you also tow.

Can I tow at the maximum and fill the tub at the same time?

Often no. Towball download and cargo both count against GVM, and GCM caps the truck-plus-trailer total. Stay inside every limit, not just the braked towing number.

Need help matching Shark tub parts?

Marvix combines a BYD vehicle-export background with exterior parts, accessories and export logistics. Send your model year, market, photos of the tub and whether you already have a cover or canopy, and we will help you check fit. 1-piece samples and retail orders are accepted, with tiered pricing on larger quantities. Mixed-SKU orders and dropshipping are available. Shipping terms are EXW, FOB and DAP worldwide; DDP is available for samples, retail and dropshipping outside Brazil, Colombia and Mexico (those three are EXW/FOB/DAP only, with the buyer handling customs). For trade terms see BYD exterior accessories wholesale, or contact us for a quote.

Facebook
Twitter
LinkedIn
WhatsApp

Sourcing BYD Vehicles and Parts from China

We support overseas buyers sourcing both BYD vehicles and BYD parts from China. For vehicle buyers, we provide BYD car wholesale and export support, including model selection, availability confirmation, export documentation, inspection and international logistics coordination.

For BYD owners, workshops, dealers and parts resellers, our BYD Accessories and Parts Hub covers exterior styling parts, body kits, interior upgrades, aftermarket replacement and repair parts, selected genuine BYD OEM parts, charging accessories and other model-specific components.

If you are looking for a specific vehicle or part, contact us with your BYD model, model year, VIN, part number or photos. We can help confirm availability, compatibility, pricing and international shipping options for both individual and wholesale orders.

coordination—whether you are a dealer building inventory, a fleet buyer sourcing multiple units, or a distributor looking for stable long-term supply. If you are searching for a Reliable BYD car supplier with transparent communication and end-to-end export support, contact us to request a quotation, current stock options, and shipping solutions tailored to your market.

Recent Post

Latest Product

Written by :

International Business Manager

Graduated From TMU in Canada , Over 10 years of experience in the automotive industry, including 5+ years specializing in New Energy Vehicle (NEV) export. He focuses on end-to-end EV export operations, covering sourcing, compliance, and international logistics.