After a parking scrape or a low-speed hit, the first job is not to rebuild the whole front end. On a BYD Song Plus or Seal U, you usually need a short list of exterior replacement parts — front bar sections, a mudguard liner, and any trims that share the same damage zone — ordered to the correct year and market build.
This guide is a repair-parts decision aid for owners, body shops and importers. It is not a styling or accessories catalogue. For lips, skirts, spoilers and diffusers as an upgrade path, see the BYD Seal U / Sealion 6 / Song Plus body kit guide. For a broader “what owners add first” overview, see the BYD accessories guide.
What usually fails first after a hit
Most everyday impacts concentrate on the front corners and the lower face of the bumper. On Song Plus / Seal U family cars that means:
- Front bar with mounting holes — the visible bumper section that takes the scrape or crush, including hole patterns for sensors or trim where the build uses them.
- Lower front bar — the lower valence / “front bar down” piece that often cracks or separates when a kerb or under-ride hits first.
- Front passenger mudguard (wing liner) — the inner arch liner that can tear, warp or lose clips when the wheel is pushed into the arch or when the bumper is torn away.
These are the three exterior components listed on Marvix’s Song Plus DM-i replacement ranges today. They are plastic body parts made for vehicle-specific fitment — not universal “any SUV” panels. The design purpose is restoration: return the visible shell and the splash liner to a serviceable state so paint and sensors can follow.
Painted finishes, brackets and grille pieces may also be needed depending on how far the impact travelled. Confirm each line against photos of your damaged car before you assume a full front-end kit.

How exterior replacement plastics are made (and why fitment matters)
Modern bumper faces and arch liners are typically injection-moulded thermoplastics. Bumper shells are often flexible PP or similar impact grades so they can flex and absorb low-speed energy; liners use tougher, more rigid plastics shaped to the arch. Aftermarket and genuine-supply pieces are moulded to a vehicle-specific tool — hole positions, sensor cut-outs, clip towers and edge radii must match that tool.
That is why a “close enough” bar from another BYD nameplate rarely sits flush. A wrong hole pattern for parking sensors or washer jets forces cutting, which shows after paint. Order against the model year, regional version and the photos of the broken part, not against a vague “Song-sized bumper” search.
Song Plus and Seal U: same family, order by the name on your car
Use the nameplate on your registration and VIN sticker when you enquire. Marvix lists the live replacement ranges under Song Plus DM-i titles; Seal U owners in markets that share this body should still send clear photos so the bar hole pattern and mudguard side can be checked against the listing.
Do not mix this repair path with Sealion 6 styling kits or with Seal U boot-space storage guides — those answer different jobs. If you also need organised rear or front storage after the body is restored, that belongs in a storage article, not in the parts list for a crash repair.
Live Marvix replacement ranges
Two published Song Plus DM-i replacement pages currently carry the front-bar and mudguard SKUs:
- BYD Song Plus DM-i replacement exterior parts (BCC-RP-011) — front bar with 2 holes, front bar down, front passenger mudguard, each with its own SKU.
- BYD Song Plus DM-i 2021–2022 replacement exterior parts (BCC-RP-006) — the same three component types for the earlier 2021–2022 application window stated on that listing.
Browse the wider catalogue under exterior replacement parts and the BYD Song Plus DM-i / Seal U DM-i model archive when you need related items. Always open the product page for the year note and the SKU table before adding lines to a quote.

Checklist before you order spare parts
- Photograph the damage — wide shot of the corner plus close-ups of holes, sensors, clips and the broken edge.
- Note year, market and powertrain — Song Plus DM-i vs later Seal U builds can share family styling but still differ in hole maps.
- Name the component — front bar / lower bar / mudguard liner first; add trims only when the photos show they are cracked or missing.
- Decide finish — unpainted plastic for the shop to colour-match, or confirm painted supply before quotation if the listing offers it.
- Quantity — one damaged corner is often a single bar plus one mudguard; do not order a mirrored pair unless both sides are hit.
- Ask for a fitment check — send VIN or clear part photos with the enquiry so Marvix can match the SKU before shipping.
Body kit vs replacement parts
A body kit changes the look with lips, skirts and spoilers. Replacement exterior parts restore the damaged factory-shaped shell after an impact. If the car is already repaired and you want a styling upgrade next, use the body kit guide linked above. If you are mid-repair, order the bar and liner that close the damage first — then decide on cosmetics once the shell is sound.
Sensors, washers and hole patterns
Front bars that look identical from three metres away can differ by millimetres at the sensor bosses. Parking sensors, camera washers and fog-lamp openings are moulded into the tool. If your car carries sensors in the damaged zone, the replacement bar must include the matching holes — or you will be drilling a painted part later. The Marvix “front bar with 2 holes” SKU name is a reminder to match the hole count and layout in your photos, not a claim that every Song Plus uses that exact map.
When the impact only cracked the lower valence, order the lower front bar alone if the upper section and sensor line are intact. Splitting the order this way keeps cost and paint work on the damaged skin.
For repair shops and importers
Shops usually need a stable SKU, a sample path and clear packaging so a second identical corner can be reordered after the next intake. The Song Plus DM-i replacement pages assign a BYD Car China SKU to each listed component for that reason. Importers building a small buffer stock should confirm year coverage on BCC-RP-011 versus BCC-RP-006 before mixing cartons. Send a parts list with vehicle photos rather than a single “bumper for Song Plus” line — that is how wrong bars leave the warehouse.
Frequently Asked Questions
What BYD Song Plus spare parts do I need after a front hit?
Start with the damaged front bar section, the lower front bar if the valence cracked, and the front mudguard liner if the arch liner tore or lost clips. Confirm year and market on the Marvix Song Plus DM-i replacement listings before ordering.
Do Seal U spare parts match Song Plus DM-i bars?
They sit in the same family for many markets, but hole patterns and sensor layouts can differ by year and region. Send photos of the broken part and the car’s model label; do not assume every Seal U bar matches every Song Plus SKU.
Can I paint the replacement bumper myself?
Body shops routinely prime and colour-match unpainted bumper plastics. If you need a painted part from the supplier, say so in the quote request — availability varies by component.
Is a front lip the same as a replacement front bar?
No. A front lip is a styling add-on that bolts under a sound bumper. A replacement front bar replaces the damaged bumper section itself. Order the bar when the shell is cracked; order a lip only when you want a styling change on an intact bumper.
Where do I browse more Song Plus / Seal U parts?
Use the Song Plus DM-i model archive and the exterior replacement parts category. For trade quantities, see BYD exterior accessories wholesale.
Request a quote for Song Plus / Seal U replacement parts
Marvix supplies vehicle-specific exterior parts with 1-piece samples and retail orders accepted, tiered pricing on larger quantities, stock shipping for many orders under 100 sets, mixed-SKU orders and dropshipping, plus fitment checks from model/year, VIN, part number or photos. Shipping terms: EXW, FOB and DAP worldwide; DDP available for samples, retail and dropshipping outside Brazil, Colombia and Mexico (those three: buyer clears customs; EXW/FOB/DAP only).
Send your damage photos and vehicle details via contact, or start from the BYD exterior accessories wholesale page for trade terms.






