The most popular BYD Shark accessories fall into five groups: a tub cover or canopy to keep loads dry and secure, a bed liner to protect the load bed, front protection such as a bull bar or steel bumper guard, carrying gear like a sports bar or cab roof platform, and small styling and weather parts. Which ones you need depends on how you use the pickup.
The BYD Shark is a plug-in hybrid dual-cab pickup (a “ute” in Australia). Depending on the market it is badged BYD Shark or Shark 6, and some parts are also listed for the Shark 5. The accessory market for it is still young, so it pays to check each part carefully before you buy.
This guide explains what each type of accessory does, what to compare between options, and what to check for your own truck before ordering.

Which BYD Shark accessories do owners fit first?
Most owners start with the tub, because an open load bed is where everyday problems show up first: wet luggage, tools on show and scratched paint. Front protection and roof carrying gear usually come later and depend on whether the truck goes off-road, tows or carries long loads.
| Accessory group | Typical parts | Main benefit | Check before buying |
|---|---|---|---|
| Tub covers | Roll-up tonneau, sliding flat cover, hard flat lid | Weather protection and security for loads | Bed length, rails, manual or electric |
| Canopies | Hardtop canopy, aluminium canopy with sliding windows | Enclosed, lockable load space | Height, rear door style, freight size |
| Tub protection | Bed liner / cargo mat | Stops scratches and wear on the bed floor | Bed dimensions and model |
| Front and underbody protection | Bull bar, steel bumper guards, battery skid plate | Off-road look and impact protection | Sensors, radar, weight and local rules |
| Carrying gear | Sports bar with basket, cab roof platform | Extra space for light outdoor gear | Roof load limit and clearance with covers |
| Styling and weather | Bonnet vent trim, window visors, grille emblem overlay | A tougher look and a drier cabin | Model year and door or bonnet shape |
Tub covers: roll-up, sliding and hard flat lids
A tub cover (tonneau cover) closes the load bed flush with the sides. It keeps rain, dust and sun off your load, hides it from view and leaves the full bed height free for when you need it. The three main styles work differently:
- Roll-up tonneau. Aluminium slats that roll into a canister at the front of the tub. Our BYD Shark manual or electric tonneau cover comes in manual and electric versions. A roll-up cover is the easiest choice if you often carry tall loads, because the cover disappears almost completely.
- Sliding flat cover. A low-profile cover that slides open for quick access. The BYD Shark sliding flat tonneau cover is a manual design with seals to keep weather out.
- Hard flat lid. A single rigid panel that lifts on struts. Our BYD Shark 6 flat hard bed cover uses hydraulic assisted opening. A one-piece lid is harder to force open, but you have to lift the whole panel to load something tall.
Before you choose, measure how often you carry loads taller than the tub sides. If that is most weekends, a roll-up cover is more practical than a hard lid. Also check that the cover works with anything else you plan to fit, such as a sports bar.

Canopies: hardtop or aluminium with sliding windows
A canopy turns the tub into an enclosed, lockable load space, a bit like the boot of an SUV. It suits owners who carry tools, camping gear or dogs and want to keep everything out of the weather.
There are two common designs. A hardtop canopy follows the truck’s waistline for a factory look; our BYD Shark 6 hardtop canopy is shaped so the gap between cab and canopy is designed to reduce wind noise on the highway. An aluminium canopy is more of a work and touring choice; the BYD Shark aluminium canopy with sliding windows lets you reach into the tub from the side and let air in.
A canopy is one of the largest parts you can buy for a pickup, so plan for freight and professional fitting. Our guide to how large parts are shipped internationally explains why volume, not weight, usually decides the shipping cost.

Tub protection: bed liners and cargo mats
The bare floor of a load bed scratches quickly once you start carrying tools, bikes or building materials. A bed liner covers the floor with a tough, easy-clean surface.
Our BYD Shark bed liner and cargo mat is listed for the Shark 5 and Shark 6 and protects the bed paint from daily wear. If you plan a tub cover or canopy as well, a liner is still worth having, because loads move about under a cover too.

Front and underbody protection: bull bars, bumper guards and skid plates
A bull bar or steel bumper guard gives the Shark a tougher off-road look and protects the front end from scrub, branches and minor knocks. Underbody plates protect the parts you cannot see from stones and rough tracks.
- Bull bars. Our front bull bar for the Shark 5 / Shark 6 bolts on using the truck’s original mounting holes and has mesh vents, amber LED pods and an opening for a winch fairlead (winch not included). It weighs about 60 kg, which adds weight over the front axle. The competition front bull bar is a second style in matte black.
- Steel bumper guards. The BYD Shark 6 front and rear steel bumper guards are manganese steel and can be ordered front only, rear only or as a set.
- Skid plate. A chassis and battery skid plate adds a protective plate under the truck for rough roads and light off-road use.
The front of a modern pickup carries parking sensors, a camera and adaptive cruise radar. Any bar must leave them clear and working, so compare the photos with your own bumper and test everything after fitting. Professional installation is recommended for all heavy steel parts.

Are bull bars and exterior changes legal?
Rules for front protection differ by country. In Europe, add-on front protection on light vehicles is covered by type-approval rules, and in Australia bull bars have to meet national design rules and state requirements. Ask your local inspection authority or installer before fitting one. For wider changes to the body, our country guides explain what to check:
- Europe: Spain, Denmark, Poland, Norway, the UK and Turkey
- Middle East: UAE, Saudi Arabia, Qatar, Oman, Kuwait and Bahrain
- Asia-Pacific: Australia
Carrying gear: sports bars and cab roof platforms
If you carry bikes, kayaks, a rooftop tent or recovery gear, you need somewhere to put it above the tub or cab. There are two main options:
- Sports bar with basket. A frame across the tub behind the cab. Our BYD Shark 6 sports bar with cargo basket adds an upper basket for light outdoor gear and changes the rear profile of the truck. Check that it clears any tub cover or canopy you already have.
- Cab roof platform. A flat rack on the cab roof. The BYD Shark 6 cab roof luggage platform gives extra space for tents and touring loads.
Anything on the roof counts against the vehicle’s roof load limit, which you will find in the owner’s manual. The weight of the rack itself is part of that limit, and the limit while driving is lower than when parked. Keep heavy items low in the tub and light, bulky items on top.

Styling and weather parts
Small exterior parts change the look of the Shark without much work:
- Bonnet vent trim. Our BYD Shark 6 hood vent trim is a pair of gloss black ABS panels for the left and right of the bonnet, made for 2024–2026 model years.
- Window visors. BYD Shark window rain visors let you keep the windows slightly open in the rain. They are listed for the Shark MK1 (2025 on) and fit with adhesive tape, so clean the door frame well before fitting.
- Grille emblem overlay. A grille emblem overlay for the Shark 6 changes the look of the front badge, with several finishes to choose from.
- Rear diffuser light. Our LED Shark 6 fin rear spoiler diffuser guard adds a lit, shark-fin styled accent to the rear diffuser area. It is a universal-style part, so measure the bumper width and check the mount points and wiring before you order.

Replacement body parts after damage
Pickups that work hard pick up dents and cracked trim. If a part is damaged rather than worn, a replacement is often cheaper than repairing it. Our BYD Shark replacement exterior parts include front bumper sections, trim pieces, the grille, fog light trim and the ACC radar mount. The right part depends on your model year, market version, sensor openings and whether the truck is left- or right-hand drive, so send us the VIN or a clear photo of the original part. You can also browse BYD exterior replacement parts for other models.
What to check before you order BYD Shark accessories
- Model name and version. Check whether the listing says Shark, Shark 6 or Shark 5, and compare it with your truck.
- Model year. Some parts give a year range, such as 2024–2026 for the bonnet trim or 2025 on for the visors.
- Left- or right-hand drive. This matters for anything around the doors, bumpers and electrics.
- Sensors and radar. Front and rear parts must leave parking sensors, cameras and radar clear.
- How parts work together. A sports bar, roof platform, tub cover and canopy all compete for the same space. Plan the full setup before buying the first part.
- Weight and loads. Steel bars and canopies add weight that counts against your payload. Stay within the roof load limit for anything on top.
- Freight and fitting. Canopies, covers and bull bars are large items. Ask for a shipping quote first and book a fitter who has worked on pickups.
Not sure which version you have? Send us your model, year, VIN or photos, and we’ll check the fit for you. You can see everything listed for the truck on our BYD Shark parts page, and our BYD Shark 6 price guide covers the truck itself.
Frequently Asked Questions
What are the best accessories for a BYD Shark?
For most owners, a tub cover or canopy and a bed liner give the most day-to-day benefit. Bull bars, skid plates and roof platforms are worth adding if you drive off-road or carry touring gear.
Do Shark 5 and Shark 6 accessories interchange?
Only where the listing says so. Some of our parts, such as the front bull bar and bed liner, are listed for both. Others are listed for the Shark 6 only.
Can I fit a tub cover and a sports bar together?
Often, but not always. A sports bar mounts on the tub sides where some covers run their rails, so check the clearance before you order both.
Does a bull bar affect the parking sensors?
It can. Check that the bar leaves every sensor, camera and the front radar clear, and test them after fitting.
Is a roll-up or hard tub cover better?
A roll-up cover is better if you often carry tall loads, because it rolls almost fully out of the way. A hard flat lid gives a solid, one-piece cover but has to be lifted to load tall items.
Order BYD Shark accessories from Marvix
Marvix is a one-stop BYD partner, combining a BYD vehicle-export background with parts, accessories and export logistics. 1-piece samples and retail orders are accepted, pricing is tiered for larger quantities, and listed parts are usually in stock, with orders under 100 sets shipped directly. We also support mixed-SKU orders, dropshipping and fitment checks from your model, year, VIN or photos.
For large parts we ship to all countries on EXW, FOB or DAP terms, plus DDP for samples, retail orders and dropshipping. For Brazil, Colombia and Mexico the terms are EXW, FOB or DAP only, and the buyer handles customs clearance and taxes. See BYD exterior accessories, review BYD exterior accessories wholesale terms, or request a quote.






